AdvanCloud connection (legacy)

sCloud activation

1. Power up the system/reader

2. Connect to AdvanNet Manager (Web Application) (admin/admin)

3. Go to the System tab and open the sCloudService (the parameters should be the same as in this image):

4. Change the Enabled parameter to true, apply service config and wait 1 minute.

5. After 1 minute or more, refresh the page and the SCloud code should appear:

6. Click on the Apply service config button.

7. Click on the Save System configuration:

8. Leave the System ON and contact your Service Manager or support@keonn.com to enable the device in AdvanCloud:

    • Send the sCloud code.

AdvanCloudBusService configuration

1. First, configure the service:

    • Set the option Enabled to true.


AdvanPay

    • Host: yourhost.keonn.com

    • Token: youtoken

    • From ID: com.host.country.shop.pays.payX.pay

    • To ID: com.keonn.global.log (always)

    • Operation ID: log (always)

    • Set the option Send Inventories to false.

    • Set the option Send AdvanPay data to true.

    • Set the option Send alarm data to false.

    • Set the option Send sensor measurements to false.

    • Set the option Send raw data to false.

AdvanSafe

    • Host: yourhost.keonn.com

    • Token: youtoken

    • From ID: com.host.country.shop.safes.safe00X.safe

    • To ID: com.keonn.global.log (always)

    • Operation ID: log (always)

    • Set the option Send Inventories to false.

    • Set the option Send AdvanPay data to false.

    • Set the option Send alarm data to true.

    • Set the option Send sensor measurements to false.

    • Set the option Send raw data to false.

2. Apply the configuration:

    • Click on the Apply service config button:

3. Persist the system settings:

    • Click on the Save System configuration: