GPO and Speaker action configuration
Connect your speaker and LED bar to the AdvanReader device. A possible connection configuration is suggested below for the AdvanReader 150 case:
Boot AdvanReader, find IP and connect to it through AdvanNet (Rember, port: 3161, user: admin, password: admin).
Test that the peripheric devices are correctly connected to AdvanReader by going to the GPIO label of AdvanNet and checking that the connected devices receive output signals. Notice that in this case particular case, the LED bar is connected to the 4th output Line.
Go to Events & Actions label and create a new tag read Event with speaker action. To do so:
Set Trigger option to: TAG_READ
Set Action option to: SPEAKER_ACTION
Modify some sound parameters if desired.
Save the action by clicking on Save new action button.
Create another a new tag read Event, this time with GPIO action. To do so:
Set Trigger option to: TAG_READ
Set Action option to: GPO_ACTION
Select Line to 4 (as in this particular example we connected the LED bar to the 4th output line of AdvanReader).
Modify some parameters of the GPO action itself if desired.
Save the action by clicking on Save new action button.
Persist the previous configured Events by clicking on the Save Config button and then to the Save icon located at the top of the screen.
