AdvanReader-10, 2 ports
Introduction
AdvanReader-10, 2 ports
AdvanReader-10, 2 ports
AdvanReader-10, 2 ports (enclosed version)
AdvanReader-10 features:
2 ports
2 x 50 ohm SMA right angle connector
High performance:
30 dBm maximum output power
Up to 50 tags/s (up to 500 tags/s under request)
AdvanReader-10 benefits:
Small form factor
Very lightweight, only 42 g
Ideal RFID solution for IoT applications
Ideal RFID solution for embedded applications
Getting Started
Helpful downloads:
Download Datasheet (see download files section)
Download User Manual (see download files section)
Connect antenna
This is not required for the models with embedded antennas
Connect the antennas to AdvanReader port 1 or port 2 with an RF Cable.
Never connect or disconnect an antenna while AdvanReader is ON. Always disconnect AdvanReader from the power supply when connecting/disconnecting antennas.
Power and connecting to AdvanReader unit
Using the USB comm port
Follow this diagram to connect AdvanReader-10:
Using the USB comm port
Using the USB comm & power port
Connecting to AdvanReader-10, 2 ports
Once the reader is powered up and connected to a PC.
Make sure the OS has created an RS232 port:
On Linux, they will appear as /dev/ttyUSBx devices
On Windows, they will appear as COMxx virtual COM ports
Controlling AdvanReader-10, 2 ports
The available SDK requires the RS232 device name to work.
At this point, the AdvanReader-10 is handled directly by ThingMagic Mercury API. Please download SDK and documentation at ThingMagic support site:
Please read the User Guide for a comprehensive guide on how to use the Universal Reader Assistant.