Network Configuration

This manual is based on systems working with ELO I-Series 2.0

Learn how to connect your device to a Wi-Fi network and LAN Ethernet.

Press and hold the two buttons on the back (Home button and Power button) of the device for 3-seconds.

2. A menu like this will be displayed.

3. Write the password: 1elo

4. From your Home screen, go to Network > Wi-Fi.

5. Tap the name of the Wi-Fi network that you want to join. Before you can join the network, you might be asked to enter the network's password.

6. After you join the network, you'll see a green checkmark next to the network connected.

Before to start any configuration you have to connect the Elo I-Series 2.0 with a LAN ETHERNET CABLE on the Ethernet port.

2. To unlock the screen you will have to do the same steps we described above in the wifi setup configuration.

3. One you are in the home screen.

5. Go to Apps > Settings > Ethernet.

7. Turn ON the Ethernet option.

8. Press Ethernet Configuration and a menu like this will be displayed.

9. By the fault, the eth0 device will be the network interface.

10. Pick the connection typye you want: a dynamic ip address (DHCP) or static ip address and press confirm.

11. At the end, the setup should look like this. With your MAC Address and IP.